Stove & Oven Repair

stove repair atlanta

(404) 777-0138

It isn’t possible to cook in your kitchen with a broken oven or stove. You should schedule oven repair ASAP or else there isn’t going to be time to whip up a delicious supper. We do not want your home to be hungry! That’s the reason we are so delighted to provide same-day stove and oven repair for homes in Atlanta, GA.

Ward Appliance Repair is here to repair all common oven, range and stove problems on major brands and models. Our team has the tools and training to finish the repair during the first appointment. Plus, we load up service vans with manufacturer parts for major appliance brands and offer customers a warranty on labor. It is our hope to fix your broken oven well before dinner!



For an electric stove will not turn on, be sure the stove is plugged in and all circuit breakers are switched on. You will want to check the pilot light on gas appliances. If the appliance is plugged in and the pilot light is lit in the oven, then another part will need to be replaced. The reason for the issue might be an infinite switch, surface element, oven burner igniter or bake and broil element.


A stove or burner with no heat does not do much good. Your oven won’t heat when there’s a broken oven sensor or a malfunctioning bake element. Your burner doesn’t turn on when an element is broken or if the burner switch or terminal block don’t work. We know how to fix these issues in under 1-2 hours after an appointment begins.


You can assume the control panel on an oven is broken when the program or timer settings do not work. If that is the case, we are able to fix control boards on GE, LG, Sears, KitchenAid, Kenmore and most other brands and models of stoves, ovens and ranges. We provide a warranty on all of the control boards and the replacement parts we install for this type of oven repair service.


You want a hot oven. But not too hot! When the oven heat is too hot, it could be due to an issue with the thermostat or sensor. Our technicians know how to diagnose the reason for the problem and then fix it. But be careful if troubleshooting this issue for fear of burns from the very high and unpredictable heat.


A reoccurring stove problem is times where an igniter will glow but will not light. The cause is sometimes from a broken {surface igniter, safety valve, electronic control|electronic control, surface igniter, safety valve|safety valve, electronic control, surface igniter| or sensor. We will determine if we are able to repair these parts or if we need to replace the parts.


Newer self-cleaning models of ovens are known to have door issues often. The door will not open after the cleaning cycle. We monitor the door closure, thermostat and seal to identify why the door doesn’t open up and then complete the repair in order to put an end to the problem.